Page Comparison

...

Pa

Anchor
Xace106914 Xace106914

ttern: Select a continuous line or one of many dot-and-dash patterns. If By Layer or By Block is used, the pattern will depend on the layer or block. There are several predefined line styles to choose from, or you can create your own. See Line Styles Linienstile.
Dash Scale: Scale of the dot-and-dash pattern.
Alig

Anchor
Xace96747 Xace96747

nment: Align the pattern so that the corners of rectangles and polygons are always solid.
Width:
Scaling: Determines whether the width of the line will be scaled, or remain the same size, when you zoom in and out of the drawing.
Device: The pen's width and pattern sizes are defined in device units (the monitor or printer). If you zoom the line width and pattern size will not change on the screen.
World: The pen's width and pattern sizes are defined in by the drawing spaces units. If you zoom the line width and pattern size will change in accordance with the zoom factor.
Device Width: The pen's pattern size is defined by the drawing spaces units, and pen's width is defined in device units (the monitor or printer). If you zoom the line patterns size will change, but the pen width size will not change. Value: Pen width. A zero width uses one screen pixel, and will print at one unit of the printer's available resolution (a 300 dots-per-inch printer will print a zero width line at 1/300".)
Geometry: Used only when World is selected for the Scaling. If checked, TurboCAD creates external and internal "walls" for the object obtained by applying a thickness method to a 2D object. You can render your drawing to see the effects of this option.

...