Available in TurboCAD Pro Platinum and Pro Only
The Sun control is designed to provide a universal control for the display of sunlight in all draft and quality renders.
Use Sun – If on a Sun light is used in all draft & quality renders. The direction of the sunlight points to the 0,0,0 point of the drawing.
Intensity: sets the power of the sunlight It takes values from 0 to 9999, with a default of 1.
Shadows – If checked the sun light casts shadows.
Use System time and Geo-Location: If selected the date and time is derived from the computer clock and the location is specified by Geo-Location
Use Specified time and Geo-Location: If selected the date and time and time zone (GMT+/-) are user specified and the location is specified by Geo-Location
Date: Sets the date.
Time: Sets the time.
Timezone: Sets the timezone as relative plus or minus to Greenwich Mean Time (GMT)
Custom: If selected the uses may directly specify the Azimuth and Angle.
Azimuth: The user can specify the Azimuth from 0.00 to 360.
...
Panel |
---|
Nur von TurboCAD Professional & Platinum unterstützt |
Die Sonnensteuerung wurde entworfen, um die Anzeige von Sonnenlicht für alle Rendertypen einheitlich zu regeln.
Sonne verwenden – Wenn diese Option aktiviert ist, wird Sonnenlicht für alle Rendertypen (grob und fein) verwendet. Die Richtung des Sonnenlichts weist zum Punkt 0,0,0 der Zeichnung.
Intensität: Stellt die Sonnenlichtstärke ein. Gültig sind Werte von 0 bis 9999. Der Standardwert ist 1.
Schatten: Wenn diese Option aktiviert ist, wirft das Sonnenlicht Schatten.
Systemzeit und Geoposition verwenden: Wenn diese Option aktiviert ist, werden Datum und Uhrzeit von der Rechneruhr abgeleitet und der Standort wird durch die Geoposition bestimmt.
Angegebene Zeit und Geoposition verwenden: Wenn diese Option aktiviert ist, sind Datum, Uhrzeit und Zeitzone (GMT +/-) benutzerdefiniert und der Standort wird durch die Geoposition bestimmt.
Datum: Legt das Datum fest.
Zeit: Legt die Uhrzeit fest.
Zeitzone: Legt die Zeitzone als relatives Plus/Minus zur Greenwich Mean Time (GMT) fest.
Benutzerdefiniert: Wenn diese Option aktiviert ist, lassen sich Azimut und Winkel benutzerdefiniert einstellen.
Azimut: Es lässt sich ein Azimut zwischen 0,00 bis 360 festlegen.
Winkel: Es lässt sich ein Winkel zwischen -90 bis 90 festlegen.