...
- Before creating the door, create a new door style. This one is a double door with a rectangular shape.
Note: For details on door s, see Door Styles. - Create walls and insert the door. Use the door's Properties window to set the overall size and elevation of the door.
This is the door that will be modified with a profile. - First, look at the Delay Style Modification icon; if it is enabled, you cannot create a new profile. Make sure Delay Style Modification is off.
- Highlight Profile styles and click Create New Style.
- Assign a name to the profile.
- When you create a profile, you switch to Edit Geometry mode, and anything you have in your file is removed from view. Because you are creating a 2D profile, switch to World Plan view.
- Use Polyline, Arc or Circle tools to create closed curves for boundaries and holes. In this example, the outer shape and the two rectangles were created using Polyline. The circle was created using Circle Center and Point.
You can have one or more boundaries, but boundaries cannot overlap. Holes must be entirely within a boundary. - To define which curves will be used for boundaries, select Edit Boundary Profile.
- Click the boundary curve or curves, which turn blue when selected.
- Select Finish from the local menu or Inspector Bar.
- To define which curves (if any) will be used for holes, select Edit Hole Profiles.
- Click the hole curve or curves, which turn blue when selected.
- Select Finish from the local menu or Inspector Bar.
- When the boundaries and holes are defined, click Finish to Edit Geometry in the Style Manager.
The profile now appears in the Preview area of the Style Manager. Boundary profiles are shown in blue, holes are shown in red.
- Now return to the door profile. Under Design, set the Profile to the one you just created.
The door outline changes to match the profile. The hole profiles define the door glass, and these areas have the material specified for Glass in the door style.
- If you want to make changes to the profile, highlight it in the Style Manager, and then click Edit Content.
- You will return to Edit Geometry mode, where you can make your changes. When you're finished editing, click Finish to Edit Geometry. The door or window that uses the profile will update automatically.
...