Page Comparison

...

Set the Edge Cut Angle: This allows you to the angle between the top plane of the slab and the edge plane if the Edge Cut is set to Square, or between the ground plane the edge plane of the slab if the Edge Cut is set to Plumb. By default the value is set to 90.

To Set the Pivot Edge

1. Select the Roof Slab with the Edit tool
    
2. Select Pivot Edge Edit from the local menu.
    
3. Hover over the desired edge. It will be highlighted in red.
   
4. Click to set the edge.
   
5.  The green indicator moves.

To Set the Edge Cut

1. Select the Roof Slab with the Edit tool
   
2. Hold down the Shift key
3. Hover over the desired edge. It will be highlighted in white. 
   
4. Click on the edge.
5. From the Inspector bar select Plumb from the Edge Cut drop-down.
    
6. The result will be a Plumb edge.
    

To Set the Edge Cut Angle

1. Select the Roof Slab with the Edit tool
   
2. Hold down the Shift key
3. Hover over the desired edge. It will be highlighted in white. 
   
4. Click on the edge.
     
5. From the Inspector bar type 60 into the Edge Cut Angle field.
   
    
    
6. Press Enter.
   
   
   
   

...