Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Several types of construction lines and circles are available.

...

Construction-Angular Line

Image Modified

  1. Select a point through which the construction line will pass. Select a second point, or enter the slant in the Inspector Bar.
    Image Modified
  2. The construction line is created, with the properties assigned to the construction layer.
    Image Modified

...

 Construction-Horizontal Line, Vertical Line

Image Modified
 Image Modified

  1. Select the point through which the construction line will pass.
  2. Continue creating construction lines of the same type, and select Finish when done.
    Image Modified

Construction-

...

Parallel

Image Modified

  1. Select the line to which the construction line will be parallel. You can also select a construction line.
    Image Modified
  2. Select a point through which the construction line will pass, or enter the offset in the Inspector Bar.
    Image Modified

    Tip: To make multiple construction lines separated by the same distance, lock the Offset field in the Inspector Bar, and create parallel lines from each successive line.

Construction-

...

Perpendicular

Image Modified

  1. Select the line to which the construction line will be perpendicular. You can also select a construction line.
    Image Modified
  2. Select a point through which the construction line will pass.
    Image Modified

...

 Construction-Center

...

and

...

Point

...

Circle

...

Image Modified
Creates a construction circle by defining its center and a point on its circumference.

  1. Select the circle centerpoint. Move the cursor to begin to size the circle.
    Image Modified
  2. Click to create the circle, or enter the radius, diameter, or circumference in the Inspector Bar.
    Image Modified

...

...

Construction-

...

Double Point Circle

Image Modified
Creates a construction circle by defining two opposite points on its circumference.

  1. Select a point on the circle circumference.
    Image Modified
  2. Select the point on the opposite end of the diameter line, or enter the radius, diameter or circumference, and angle of the diameter line in the Inspector Bar.
    Image Modified

...

...

Construction-Triple Point Circle

Image Modified
Creates a construction circle that passes through three points.

  1. Select the first point on the circumference.
    Image Modified
  2. Select the second point.
    Image Modified
  3. Select the third point.
    Image Modified

...

 Construction-Perpendicular by Line

Image Modified
Creates a construction line perpendicular to a line defined by two points.
Start with two circles, We will create a construction line halfway between the centers of the two circles perpendicular to the axis between the two centers.

  1. Select the tool, then snap to the center of the first circle.
    Image Modified
  2. Move the cursor. Notice that the preview of the construction line is parallel to the line you are dragging out.
    Image Modified
  3. Snap to the center of the other circle to set the construction line.
    Image Modified