Anchor
different drawing environments, for example if you draw round objects it may be
easier to use polar coordinates.
| The World Coordinate System (WCS) is the internal, high accuracy (10 digits) and absolute coordinate system. To display the WCS axes, select Workspace / World Coordinate System, and they will appear at the lower |
...
| left corner of the screen. The WCS indicator does not represent |
...
| the origin; it indicates orientation. |  WCS Indicator |
| The |
...
| User Coordinate System (UCS) |
...
| is the coordinate system in which you are working. By default, it is located |
...
| to coincide with the WCS, but it can be moved and relocated by the user. UCS axes can be displayed |
...
| by selecting Workspace / User Coordinate System, and they appear wherever |
...
| the origin is located. |
...
| Selecting an object using 2D Selector mode changes the UCS (and therefore the workplane) to the one attached to the selected object. |  UCS Indicator |
In each coordinate system you also have an option to use either relative or
absolute coordinates.
The UCS indicator is helpful if you want to see how the UCS moves. You can
display markers for the UCS and WCS via the Workspace menu, and customize the
markers' appearance via the Preference page of the Program Setup (Options /
Preference). The WCS indicator is always shown at the lower left corner of the
screen; the UCS indicator is shown at the UCS origin.
Set UCS by Selector: Moves the UCS origin to the selection reference point.
Set Selector by UCS: Moves the selection to the UCS origin (similar to the Place on WorkPlane option for 2D objects).
Note: The 2D Selector always moves the UCS (Workplane) to the selection.