Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Before creating any doors, you must have at least one wall defined. See Inserting WallsTo assign height to a wall, define a Thickness in the 3D page of the wall's Properties.
  2. This is the icon for Door. Right-click on the icon to set the tool's Properties, and click the icon when you're ready to insert a door.
  3. Open the Door tool's Properties. On the General page, select the Door Style.
  4. On the Door Main page, set the overall dimension of the door. The preview at the lower left updates when you change the values.

    Width and Height: Overall outer dimensions of the window. 
    Inside/Outside of Frame: Specifies that the dimensions of the window are applied by measuring to the inside or outside of the window frame.
    Vertical alignment: Specifies whether the widows vertical position is specified by the Threshold Height, or the Head of the window.
    Head Height: Specifies the vertical location of the top of the window. This field is only accessible if the vertical alignment option is set to Head of object.
    Threshold Height: Specifies the vertical location of the sill of the window. This field is only accessible if the vertical alignment option is set to
    Threshold. Rise: The distance from the top corner to the top center, in the case of arched or peaked windows.
  5. Frame Inset: The distance from the front of the wall to the window frame. Elevation: The distance from the bottom of the wall to the bottom of the window. This value is also available on the Inspector Bar.
    Open Percent: Defines how wide the window is open.Leaf:in the case of uneven doors, the size of one of the panes.
  6. On the Pen page, specify the color of the door. This color will be applied to any part of the door that does not have a material assignment.
  7. When all parameters are set, click the wall to place the door. The wall material within the door area is removed. No matter where you click on the wall, the door is placed according to the Elevation value. In this example, the door stop is colored black, which is the default Pen color. The frame and panel have the assigned materials.
  8. You can orient of the window to the wall by using the Flip Left-Right, Flip Inside-Outside controls in the Local menu, or Inspector bar.All parameters that available on the Properties window, including Door style, are also available on the Selection Info palette. If you move a door, it will remain within the plane of the wall.

Anchor
681
681
Door Types

These are the standard door types available in theDesigncategory of the Style Manager.

...

Single

Anchor
684
684
Double
Anchor
685
685
Double Opposing
Anchor
686
686
Bifold
Anchor
687
687
Bifold Double, Panel
Anchor
688
688
Pocket
Anchor
689
689
Double Pocket
Anchor
690
690
Sliding Double
Anchor
691
691
Sliding Triple
Anchor
692
692
Overhead
Anchor
693
693
Revolving
Anchor
694
694
Pass Through (no panel)
Anchor
695
695
Accordion
Anchor
696
696
Communicating

Anchor
697
697
Door Muntins

Anchor
698
698
Available in TurboCAD LTE Pro / DoubleCAD Pro only

...