Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Tool for imprinting 2D objects (line, polyline, arc, circle, curve) into faces of ACIS objects. This creates separate areas on the imprinted face. These areas can now have different materials or can be extruded with the Quick Pull tool.

The imprinting object must meet the following criteria:

...

  1. Select the tool.
  2. Select the ACIS object which is to be imprinted.
     
  3. If you wish to delete the source object for the edge select the Delete source option in the Local menu or the Inspector bar. This option is on by default
  4. If multiple faces need to be selected, select the Select faces to be imprinted option in the Local menu or the Inspector bar.
  5. If the Select faces to be imprinted option is on select the desired faces, then click Finish.

    If you accidentally select the wrong face/s use the Deselect all selected faces option in the Local menu or the Inspector bar, or click again on the faces you wish to deselect.
  6. Click any edge you wish to imprint.
     
  7. Repeat step 7 as many times as you need.
  8. Click Finish after you have select all the desired edges. You can now select another solid.
     
  9. Press ESC or the Space bar to drop the tool.

 You can now use the Drag on Facet feature of the Materials palette to put different materials sections of the face.

Image Added

Image AddedImage Added

Options:

Delete source: When on the source objects for the edges will be deleted. It is on by default.

...