This manual serves as the User Guide for all TurboCAD LTE 8 / DoubleCAD 5 Products

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Available in TurboCAD LTE Pro only


Locks an object or endpoint at its current coordinate, preventing the object or point from moving when constraints are applied.
Note: The fixed object or point can be moved while editing geometry, but will not move when constraints are placed upon it.

  1. To fix an object, activate the Fix Geometry constraint and select the object you want to fix.
  2. Now if you apply a constraint, such as Parallel in this case, the non-fixed line will move, regardless of the selection order.
  3. For another example of this tool, start with a line and arc and apply a Connect constraint (see Connect Constraint).
  4. The result is that the line maintains its orientation and is tangent and trimmed to the arc.
  5. Undo this constraint, and apply a Fix Geometry constraint to the line's endpoint.
  6. Now apply the Connect constraint. The endpoint stays fixed, and the orientations of the line and arc are modified.
  7. If you edit the line or arc, such as changing start or end angles, the fixed point will not move, and the other objects will move or rotate accordingly.
  • No labels