This manual serves as the User Guide for all TurboCAD LTE 8 / DoubleCAD 5 Products
Fix Geometry Constraint
Available in TurboCAD LTE Pro / DoubleCAD Pro only
Locks an object or endpoint at its current coordinate, preventing the object or point from moving when constraints are applied.
Note: The fixed object or point can be moved while editing geometry, but will not move when constraints are placed upon it.
- To fix an object, activate the Fix Geometry constraint and select the object you want to fix.
- Now if you apply a constraint, such as Parallel in this case, the non-fixed line will move, regardless of the selection order.
- For another example of this tool, start with a line and arc and apply a Connect constraint (see Connect Constraint).
- The result is that the line maintains its orientation and is tangent and trimmed to the arc.
- Undo this constraint, and apply a Fix Geometry constraint to the line's endpoint.
- Now apply the Connect constraint. The endpoint stays fixed, and the orientations of the line and arc are modified.
- If you edit the line or arc, such as changing start or end angles, the fixed point will not move, and the other objects will move or rotate accordingly.