You can find any tool by the Menu Structure HERE: https://turbocaddoc.atlassian.net/wiki/display/TC21UG/Menu+Structure

You can find the menu location of any tool by name HERE: https://turbocaddoc.atlassian.net/wiki/display/TC21UG/Tools+Mapped+to+Menus

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


Creates a rectangular prism, based on a rectangle defined by three points.

  1. The rotated box will be placed on top of this shallow box. The first click defines one corner of the base rectangle.
  2. The second click defines one edge of the base rectangle.
  3. The third click defines the width of the base rectangle.
  4. The fourth and final click defines the height of the box. You can also enter the length, width, and angle of the edge of the base rectangle, and the height, in the Inspector Bar.The Properties window of a rotated box contains a Box page, in which you can set the length, width, and height.
  • No labels