You can find any tool by the Menu Structure HERE: https://turbocaddoc.atlassian.net/wiki/display/TC21UG/Menu+Structure

You can find the menu location of any tool by name HERE: https://turbocaddoc.atlassian.net/wiki/display/TC21UG/Tools+Mapped+to+Menus

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


Creates a mirror image of an object by defining a mirror line.

  1. Select the objects you want to mirror and activate Mirror Copy.
  2. Define the mirror line by selecting two points, or by selecting one point and entering an angle in the Inspector Bar.

  3. The mirror copy is made after the mirror line has been defined.

  4. Click anywhere to exit Select mode, or press Esc.
     

Note: For text to be mirrored, it must be Flexible. Otherwise the text will read the same way on both sides of the mirror line. See Text Properties. When selecting objects for mirroring, especilly text or dimensions, it is important that the selector be in 2D Mode. If the selector is in 3D mode the text will be mirrored as well as any geometry. In 2D mode the text remains normal (in readable orientation) while the geometry is mirrored.


  • No labels