$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Available in TurboCAD Pro Platinum and Pro Only

The Sun control  is designed to provide a universal control for the display of sunlight in all draft and quality renders.

Use Sun – If on a Sun light is used in all draft & quality renders.  The direction of the sunlight points to the 0,0,0 point of the drawing.


Intensity: sets the power of the sunlight It takes values from 0 to 9999, with a default of 1.

Shadows – If checked the sun light casts shadows.

Use System time and Geo-Location: If selected the date and time is derived from the computer clock and the location is specified by Geo-Location

Use Specified time and Geo-Location: If selected the date and time and time zone (GMT+/-) are user specified and the location is specified by Geo-Location

Date: Sets the date.

Time: Sets the time.

Timezone: Sets the timezone as relative plus or minus to Greenwich Mean Time (GMT)

Custom: If selected the uses may directly specify the Azimuth and Angle.

Azimuth: The user can specify the Azimuth from 0.00 to 360.

Angle: The user can specify the Angle from 0.00 to 90.

 

  • No labels