This manual serves as the User Guide for all TurboCAD LTE 7 / DoubleCAD 5 Products

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Applies a hatch pattern to a selected closed area. The closed objects must be selected before the Hatch tool can be used.

  1. Set the hatch pattern by opening the Properties window of the Hatch tool. On the Brush page, select the pattern and other hatch parameters.
  2. Use the Select tool to select the objects you want to hatch.
  3. Click Hatch or select Format / Create Hatch. !worddav8768dd4834d11c3c3d538107ee495c39.png|height=111,width=138!The hatch is not applied to overlapping areas.
  • No labels