Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Available in TurboCAD Pro and Pro Platinum Only

You can adjust he location of the Reference point for a Drafting object in the following manner. Reference point funtionality applies only to the WorldCS, it isn't allowed for Entity and Workplane CS.

In a World CS youcan also turn Reference point functionality on and off.

  1. Create the drafting object from sphere with followed options turned on.
  2. With the New drafting object created, the reference point position will be defined automatically according to center of extents of the source entities. The Reference point is defined for the DRAFTING PART (with all of its drafting objects), not for each single drafting object within it:
      
  3.  Add other 3D parts to the sphere to change the drafting object (The position is always related to reference point)
      
  4. To define new reference point, right click on PART object in thedrafting tree and select Define Reference Point:
  5. Ckick to define the new reference point position for the PART in Model Space:
  6. All drafting objects within a part where reference point position was changed will be updated accordingly to new reference point position:

 

  • No labels