This manual serves as the User Guide for all TurboCAD LTE 6 / DoubleCAD 5 Products

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »


Creates a dimension based on the object selected.
Note: To create a group of various types of dimensions automatically, see Auto Dimension.
If you select a circle, a diameter dimension will be created.
In the Inspector Bar, you can change the text, set the angle of the dimension, and set the length of the leader line.
If you select a line or line segment, its length dimension will be created.
If the line segment is not orthogonal, there are three possible dimensions you can create: Parallel
Orthogonal (vertical)
Orthogonal (horizontal)
If you select an arc or arc segment, a radial dimension will be created.
To create an angular dimension, press Shift and select the two lines.
Smart dimensions also work for linear and circular edges of solid ACIS objects (Available in TurboCAD LTE Pro only). You can use this feature to dimension cross-section generated through the Drafting Palette, as long and the Surface Engine option in the Drafting Palette was turned off when the section was created.
Linear and angular dimensions can also be created for 3D Polylines.

  • No labels