The extract Extract Entity is used to derive 2D elements from 3D ACIS solids and to modify ACIS surfaces/sheet bodies.

ACIS surfaces/sheet bodies result when non-closed objects, such as a line segment, are extruded, revolved or swept. They can also be created from ACIS Solids by using the Create Surface from Solid tool, or by using the Create Surface from Profile tool on a closed 2D object, and by using the this tool.

Modes:

Extract Edge

In this mode the tool is used to extract an edge from a 3D entity.

To extract an edge:

Select the Extract Entity tool.
Select the Extract Edge mode from the Inspector bar or Local menu.
Hover of the edge you wish to extract, and click on it.

Result:

Options:

Extract Loop from Seed Edge and Face: When this option is on you can extract all connected edges on a selected face of the 3D object. Note: a Loop is the closed sequence of edges that bound a face.

To extract an edge loop:

Select the Extract Entity tool.
Select the Extract Edge mode from the Inspector bar or Local menu.
Select the Extract Loop from Seed Edge and Face option from the Inspector bar or Local menu.
Hover of the face you wish to extract from, and click on it.
Hover of the edge on the loop you wish to extract, and click on it.

Result:

Remove Open Gap

In this mode the tool is used to remove holes in ACIS surfaces/sheet bodies.

To remove an open gap:

Select the Extract Entity tool.
Select the Remove Open Gap mode from the Inspector bar or Local menu.
Hover of the edge of the hole you wish to remove, and click on it.

Result:

Extract Face

In this mode the tool is used to extract a face from a 3D entity.

To extract a face:

Select the Extract Entity tool.
Select the Extract face mode from the Inspector bar or Local menu.
In the Inspector bar specify the Offset Distance at which the new sheet body will be created.
Hover of the face you wish to extract, and click on it.

Offset Face Loop

Options:

Offset Planar Face Loops

Options: