Vertical

                    
Create a vertical section.

  1. Create a 3D element. Now use the section line tool (See Section Line) to cross the pertinent 3D elements.
  2. Select vertical section tool. Right click to open the local menu. Select either 2D Section /Elevation or 3D Section /Elevation.

Alternatively, you can also select 2D Section /Elevation or 3D Section /Elevation in the inspector bar.

  1. Select the Section line.
  2. Select the pertinent 3D elements.
  3. Select finish from local menu or in the inspector bar. You will then have the section and will be prompted to select section position. Click in the drawing to place the section.


You can edit the size, orientation and position of the section line using edit tool. (see Edit Tool)