Door Styles

The Door tool can be used to insert doors into walls, but you need to first define door styles.


Note: If you want to save styles to a template, see Saving as Templates.


In the Style Manager, there is one style, "Standard," listed under "Door styles." A preview showing a previous of the door style is on the lowest pane.


Note: In the Preview area, you can click to zoom part of the graphic. Double-click to fit the graphic in the window.


  1. You can change the "Standard" style, but if you want to preserve this style, make sure "Standard" is highlighted and click Create New Style.
  2. Assign a name.

    This creates a new style which is a copy of "Standard."
  3. There are three categories of properties. Open Dimension, where you can specify measurements of the frame, stop, door panel, and glass.

    Auto Adjust to Width of Wall: Sets the depth of the door so that it will cut all the way through the wall.
  4. Open Design, where you can specify the door type (single, double, pocket, etc.) and shape (rectangular, arch, half round, etc.). 
  5. You can also select, edit and create muntins. 
    Note: Profile is used when you've created a profile for changing the door shape, or for adding holes. See Profile Styles.
  6. The last category is Materials, in which you can set the materials of the frame, stop, panel, and glass. If you leave any material blank (such as the Stop Material below), the object will be colored according to the Pen color set in the window's Properties.

    To set or change a material, just click in the field. In the Materials window that opens, select the Category and Material.


    Note: For details on materials, see Materials. Glass material will only be used if the door uses a profile that includes holes. 
  7. Before creating any doors, you must have at least one wall defined. See Inserting WallsTo assign height to a wall, define a Thickness in the 3D page of the wall's Properties.
  8. This is the icon for Door. Right-click on the icon to set the tool's Properties, and click the icon when you're ready to insert a door.
  9. Open the Door tool's Properties. On the General page, select the Door Style.
  10. On the Door Main page, set the overall dimension of the door. The preview at the lower left updates when you change the values.

    Width and Height: Overall outer dimensions of the door.
    Inside/Outside of Frame: Specifies that the dimensions of the door are applied by measuring to the inside or outside of the door frame.
    Vertical alignment: Specifies whether the door vertical position is specified by the Threshold Height, or the Head of the door.
    Head Height: Specifies the vertical location of the top of the door. This field is only accessible if the vertical alignment option is set to Head of object.
    Threshold Height: Specifies the vertical location of the sill of the door. This field is only accessible if the vertical alignment option is set to Threshold.
    Rise: The distance from the top corner to the top center, in the case of arched or peaked doors.
    Frame Inset: The distance from the front of the wall to the door frame.
    Elevation: The distance from the bottom of the wall to the bottom of the door. This value is also available on the Inspector Bar.
    Open Percent: Defines how wide the door is open.
    Leaf: in the case of uneven doors, the size of one of the panes.


  1. On the Pen page, specify the color of the door. This color will be applied to any part of the door that does not have a material assignment.
  2. When all parameters are set, click the wall to place the door. The wall material within the door area is removed. No matter where you click on the wall, the door is placed according to the Elevation value. In this example, the door stop is colored black, which is the default Pen color. The frame and panel have the assigned materials.

    In World Plan view, you can see how the door cuts the wall.
  3. You can orient of the window to the wall by using the Flip Left-Right, Flip Inside-Outside controls in the Local menu, or Inspector bar.
    All parameters that available on the Properties window, including Door style, are also available on the Selection Info palette. If you move a door, it will remain within the plane of the wall.

Door Types

These are the standard door types available in the Design category of the Style Manager.

Single
 
Double
 
Double Opposing
 
Bifold
 
Bifold Double, Panel
 
Pocket
 
Double Pocket
 
Sliding Double
 
Sliding Triple
 
Overhead
 
Revolving
 
Pass Through (no panel)
 
Accordion
 
Communicating

Door Muntins

Door muntins can be applied only to doors with glass components.
To make a door with glass components you must create profile first (Style Manager | Profile Styles).
As soon as you have profile style created, navigate to the door styles, select the door style you wish add muntins to and select the profile as door shape (Door Shape = Custom, Profile = "Profile Style 1")
Door muntins are available in several patterns that you can customize into many different styles:

  • Rectangular
  • Diamond
  • Prairie 9 Lights
  • Prairie 12 Lights
  • Starburst
  • Sunburst

The Starburst and Sunburst patterns are combined rounded/rectangular patterns with a half-round or a quarter-round spoked top and can be used for half- and quarter-round as well as rectangular muntins. The other patterns are primarily rectangular but will fit into a half-round.
Multiple muntin blocks can be assigned to each style. This allows you to have different patterns of muntins for each panel of glass, or to combine muntin patterns.
To setup muntins component please do the following:

  1. Open the Style Manager Palette.
  2. Navigate to the Door styles.
  3. Select the door style you wish to add muntins to.
  4. Expand the Design properties category and click Muntins.
  5. The Muntins dialog will appear.

This dialog contains list of all muntins assigned to the door style.
For example you can add muntins with Rectangular pattern to the one door glass component and muntins with diamond to other component.

Add: displays the Muntins Block dialog where you can define a name for the muntins block and it's properties.

Edit: displays the Muntins Block dialog with properties for the selected muntins.

Delete: Deletes the selected muntins block.

Disable Muntins: when ON - muntins are disabled.

  1. Open the Style Manager and select a door style you wish to add muntins to.
  2. Expand the Design properties category and click Muntins.
  3. The Muntins dialog will open.
  4. Click the Add button to open Muntins block dialog.
  5. Muntins can be applied to All door glass components, or to individual glass component pane.If you specify a single panel you must specify the number of the panel to be used. The number of the panel corresponds to the order in which you selected the hole profiles.


    Note: If you cannot see the door because the preview is rotated, click on the preview with the center mouse button (wheel) hold and drag. This will rotate the preview.
  6. Define the muntins width and depth.
  7. Select the Rectangular in Pattern combo-box.
  8. Enter number of horizontal muntins lights in "Lights High" edit box.
  9. Enter number of vertical muntins lights in "Lights High" edit box.
  10. Click OK to close the Muntins Block dialog.
  11. Click OK to close Muntins dialog.

The Diamond Muntins pattern uses the same options as the Rectangular pattern.

Prairie-9 Lights pattern, and the Prairie-12 Lights pattern use two alternate options:

Edge X Offset and Edge Y Offset: these specify the distance of the outer muntins from the panel edge.

The Starburst Muntins pattern has two additional options:

Spokes: which sets the number of spokes that radiate out from the center to form the burst pattern.

Center: which sets whether the hub will be at the Top or Bottom of the radial pattern.

The Sunburst Muntins pattern has two additional options.

Style: this sets the whether the center of the sunburst will be an open circle or a closed disk.

Radius: this sets the radius for the center of the sunburst.