Pick Point and Hatch

Owned by Brian Carter (Unlicensed)
Last updated: Jun 15, 2015
1 min read

 

This command has to be activated via the Customize dialog.
Applies a hatch pattern to a closed boundary, by clicking one point within the desired boundary. This tool recognizes overlaps and islands.

  1. Set the hatch pattern by opening the Properties window of the Hatch tool. On the Brush page, select the pattern and other hatch parameters.
  2. Activate Pick Point and Hatch.
  3. Click any point within the desired boundary to create the hatch.
  4. To hatch another area, you must activate the tool again and pick another point.