Photo Note

Owned by Brian Carter (Unlicensed)
Last updated: Oct 08, 2014
2 min read

Photo notes are used to add photo documentation to your GeoMarks.

NOTE: When you take a photograph the GPS location data will be embedded in the photo.

Tap the red REC button to activate photo taking mode.

  

To create a photo note:

  1. Select the GeoMark you wish to edit.
  2. Go to the Photo section.
  3. Tap the REC button.
  4. Tap the Camera Selector to designate the camera you wish to use.
  5. Point the camera at the area you wish to photograph.
  6. Tap the Take Photo button.

Once you have taken a photo you can tap the QuickSend button

QuickSend will use the Ipad's Share functionality to direct the photo to all the locations and by all the means available on your Ipad.

If you tap directly on the photo you will be presented with two options:

  • Expand Photo 
  • Mark-Up Photo

Expand Photo

Tapping the expand photo button will cause the current photo to be shown at the full size of the screen. You will also be able to scroll through all of the other photos attached to the GeoMark at full size via finger swipes.

To return to normal size tap the Expand Photo button again.

Mark-Up Photo

When you tap on the Mark-Up photo button  the photo will expand to the full size of the screen, and the regular mark-up/red line tools will appear.

You can use the drawing tools to mark-up the photo as you would a drawing.

you will also be able to zoom in and out for detail work

Tap the Return button to go back to the GeoMark with the marked up photo.

You can edit or remove the mark-up at anytime in the future.